50
Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
5
About MOVITOOLS
®
MotionStudio
Project Planning and Startup with MOVITOOLS
®
MotionStudio
5 Project Planning and Startup with MOVITOOLS
®
MotionStudio
5.1 About MOVITOOLS
®
MotionStudio
5.1.1 Tasks
The software package enables you to perform the following tasks:
• Establishing communication with units
• Executing functions with the units
5.1.2 Establishing communication with other units
The SEW Communication Server is integrated into the MOVITOOLS
®
MotionStudio
software package for establishing communication with the units.
The SEW Communication Server allows you to create communication channels.
Once the channels are established, the units communicate via these channels using
their communication options. You can operate up to four communication channels at the
same time.
MOVITOOLS
®
MotionStudio supports the following types of communication channels:
• Serial (RS-485) via interface adapters
• System bus (SBus) via interface adapters
• Ethernet
•EtherCAT
• Fieldbus (PROFIBUS DP/DP-V1)
• Tool Calling Interface
The available channels can vary depending on the units and their communication
options.
5.1.3 Executing functions with the units
The software package offer uniformity in executing the following functions:
• Parameterization (for example in the parameter tree of the unit)
•Startup
• Visualization and diagnostics
• Programming
The following basic components are integrated into the MOVITOOLS
®
MotionStudio
software package, allowing you to use the units to execute functions:
• MotionStudio
• MOVITOOLS
®
All functions communicate using tools. MOVITOOLS
®
MotionStudio provides the right
tools for every unit type.
To Next Page
Loading...
