56
Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
5
Communication via USB
Project Planning and Startup with MOVITOOLS
®
MotionStudio
5.4.3 Configuring USB communication
You need a USB connection between your PC and the unit you want to configure.
Proceed as follows to configure USB communication:
1. Click on "Configure communication plugs" [1] in the toolbar.
This will open the "Configure communication plugs" window.
2. From the dropdown menu [1], select "USB" as the communication type.
In the example, "USB" is activated as the communication type for the first
communication channel [2].
3. Press the [Edit] button [3] on the right side of the "Configure communication plugs"
window.
9007200388082827
[1] "Configure communication plugs" icon
1679056651
[1] "Type of communication" dropdown menu
[2] "Activate" checkbox
[3] [Edit] button
[1]
To Next Page
Loading...
