54
Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
5
Communication via USB
Project Planning and Startup with MOVITOOLS
®
MotionStudio
5.4 Communication via USB
5.4.1 Connecting the unit with the PC via USB
The illustration shows how the unit (in the example a DH.21B/41B controller [3])) is
connected with the PC [1] using a USB connection cable [2]. It also shows how the
controller [3] is connected with the lower-level unit [5] via SBus (CAN).
Do the following to connect the DH.21B/41B controller with the PC and the lower-level
unit:
1. Insert the USB-A connector of the USB cable [2] into a free USB port on your PC [1].
2. Insert the USB-B connector of the USB cable [2] into the USB port on your DH.21B/
41B option [3].
3. Connect the SBus interface of the controller [3] with the SBus interface of the lower-
level unit [5].
1716605579
[1] PC with USB interface
[2] USB connection cable
[3] Controller (DHF41B for example)
[4] SBus connection (CAN based) between controller and lower-level unit
[5] Lower-level unit (MOVIAXIS
®
in this example)
[1]
[5]
[3]
[2]
[4]
1
5
To Next Page
Loading...
