58
Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
5
Communication via Ethernet
Project Planning and Startup with MOVITOOLS
®
MotionStudio
5.5 Communication via Ethernet
5.5.1 Direct communication
Overview The figure shows the network with direct communication using Ethernet:
Function Parameter requests from MOVITOOLS
®
MotionStudio are transferred via Ethernet [2]
from a PC [1] to a switch [3] using the Ethernet TCP/IP interface.
The parameter requests are then passed directly on to the Ethernet interface of the units
[4] from the switch [3].
1193501835
[1] PC with Ethernet TCP/IP interface
[2] Ethernet TCP/IP connection
[3] Switch
[4] Units (examples) with Ethernet interfaces
[1]
EURODRIVEEURODRIVE
To Next Page
Loading...
