Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
67
5
Executing functions with the units
Project Planning and Startup with MOVITOOLS
®
MotionStudio
7. Press the enter key to finalize any changes you make to numerical values in the input
fields.
5.6.3 Starting up units (online)
Do the following to start up the units (online):
1. Switch to the network view.
2. In the toolbar, click on "Switch to online mode" [1].
3. Select the unit you want to startup.
4. Open the context menu and select the command [Startup] / [Startup].
The Startup wizard opens.
5. Follow the instructions of the startup wizard and then load the startup data into your
unit.
INFORMATION
• Refer to the parameter list in the unit documentation for detailed information on
the unit parameters.
9007200438771211
[1] "Switch to online mode" icon
[1]
To Next Page
Loading...
