Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
57
5
Communication via USB
Project Planning and Startup with MOVITOOLS
®
MotionStudio
This will display the settings for the "USB" communication type.
4. Change the set communication parameters if necessary. When doing so, refer to the
detailed description of the communication parameters
5.4.4 USB communication parameters
The following table describes the communication parameters for the USB
communication channel:
1679062667
Communication parameters Description Note
Timeout Waiting time in [ms] that the
master waits for a response from
a slave after it has sent a request.
Default setting: 350 ms
To Next Page
Loading...
