30
Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
4
Installing the DH.21B/41B option
Assembly and Installation Notes
4.7.9 SD memory card types OMH41B-T. and OMC41B-T.
The SD memory card is required for operating the DH.21B/41B option. It stores the
firmware, the IEC program and user data (e.g. recipes). You can use the memory card
for data backup and automatic parameterization in the event of an axis replacement.
The SD memory card is available in 26 variants (T0 – T25). The different variants let you
execute different technology functions. The technology level can be changed by
changing the SD memory card.
OMH41B-T. type With the SD memory card type OMH41B-T., the DH.21B/41B option is used as freely
programmable controller. The SD memory card OMH41B-T. is inserted in the DH.21B/
41B option. If the delivery also includes a compact controller, a MOVIAXIS
®
master
module or an inverter with installed DH.21B/41B option, then the SD memory card is
already installed in the DH.21B/41B option.
SD memory card OMH41B-T.
Technology
levels
T0 – T25
Part number Description
T0 1821 204 2 • Speed control management
• Positioning, e.g. with the MPLCMotion_MDX library
T1 1821 205 0 Additional technology functions for T0:
• Electronic cam
• Electronic gear unit
• Cam controller
T2 1821 206 9
A certain number of technology points is consumed depending on the
functionality used.
Refer to the relevant documentation for information on how many
technology points are required.
T3 1821 967 5
T4 1821 968 3
T5 1821 969 1
T6 1821 970 5
T7 1821 971 3
T8 1821 972 1
T9 1821 974 8
T10 1821 975 6
T11 1822 860 7
T12 1822 861 6
T13 1822 862 3
T14 1822 863 1
T15 1822 865 8
T16 1822 866 6
T17 1822 867 4
T18 1822 868 2
T19 1822 869 0
T20 1822 870 4
T21 1822 871 2
T22 1822 872 0
T23 1822 873 9
T24 1822 874 7
T25 1822 875 5
To Next Page
Loading...
