Manual – Controllers DHE/DHF/DHR21B (standard) and DHE/DHF/DHR41B (advanced)
63
5
Communication via Ethernet
Project Planning and Startup with MOVITOOLS
®
MotionStudio
3. Click [Edit] [3] in the right section of the window.
This will display the settings for the "Ethernet" communication type.
4. Set up the SMLP protocol. To do so, select the "SMLP settings" tab.
SMLP stands for Simple MOVILINK
®
Protocol. This is the SEW-EURODRIVE unit
protocol and is transmitted directly via TCP/IP.
5. Set the parameters. Follow the instructions described in the section "Setting
communication parameters for SMLP".
To Next Page
Loading...
