Manual – IPOSplus®
207
17
Overview of commands for standard functions
Compiler – Functions
17.2.5 Standard setting functions
17.2.6 Special standard unit functions
Command Function Availability Reference
MOVIDRIVE
®
B MOVITRAC
®
B MQx
_Copy Block-by-block, consistent copying
of variables.
XXX (page210)
_GetSys Reads an internal system value. observe the unit-specific command structure (page 211)
_SetInterrupt Defines a function as interrupt rou-
tine and activates or deactivates it.
XXX (page235)
_SetVarInterrupt Defines a function as variable rou-
tine and activates or deactivates it
(only MOVIDRIVE
®
B).
X - - (page 240)
_SetSys Sets an internal system value. observe the unit-specific command structure (page 236)
Command Function Availability Reference
MOVIDRIVE
®
B MOVITRAC
®
B MQx
_AxisStop The drive is stopped. X - - (page 208)
_FaultReaction Sets the fault response to a selected
fault.
X X - (page 210)
_Memorize Saves or loads variables or
IPOS
plus®
program.
XXX (page221)
_TouchProbe Enables or locks a touch probe
input.
X - X (page 242)
_WdOn Sets the Watchdog timer to a spe-
cific value.
XXX (page245)
_WdOff Turns the Watchdog off. XXX (page244)
To Next Page
Loading...