Sharp el-9950 - Data List Operations

161
Chapter 8: Statistics & Regression Calculations
4. Data list operations
Descending sort, ascending sort, changing the list order and deleting the lists can be
done in the Operation menu.
Press
S
B OPE to access the data list operations.
1 sortA( sortA(list)
Sortsthelistinascendingorder.
ThisfunctionisthesameasthesortA(menuiteminListfunctions.
Seepage136fordetails.
2 sortD( sortD(list)
Sortsthelistindescendingorder.
ThisfunctionisthesameasthesortD(menuiteminListfunctions.
Seepage136fordetails.
3 SetList SetList list name 1 [, list name 2 ...]
Changesthelistorderasspecied.
Example
To change the order of lists in
orderofL2,L3,L1.
Press
E
to execute.
Each list must be separated by a
“,”(comma).
• Ifonlyasinglelistnameisspecied,thespeciedlistmovesto
the left end of the table.
• Afterchangingthelistorder,executeSetList with no argument.
The list names are redefined according to the changing order.
4 ClrList ClrList list name 1 [, list name 2 ...]
Deletes all the data from the specified list(s).
Example
TodeletethedataofL1andL2.
Press
E
to execute.
Each list must be separated by a
“,”(comma).