Sharp el-9950

227
Chapter 12: OPTION Menu
• TheoptionalkitCE-LK4(cableandWindowssoftware)is
requiredforcalculatortodatacommunicationwithPC.
And “SHARP CE-LK4 for EL-9950” (PC-Link software) must
be installed on your Windows PC.
• RefertotheCE-LK4operationmanualfordetails.
• DuringcommunicationsbetweencalculatorandPC,nooperation
of the calculator is required. Just connect the cable and press the
power on key, and the entire operation can be controlled from the
PC.
• CE-LK4canalsobeutilizedtoupdatethecalculator’ssoftware.
5. Reset function
If a problem occurs after replacing batteries, or the calculator does not function
correctly,usetheRESEToption.
1. Press
@
p E
.
2. Press
1
to return the
calculator’sSETUPand
FORMATsettingstothe
default value, or
2
to
delete all the stored data.
See“ResettingtheCalculator”onpage47fordetails.
Transmission
between the EL-
9950 and PC