Sharp el-9950

226
Chapter 12: OPTION Menu
6. Selecttheitemtosendusing
{
/
}
and pressing
E
.
A“
✱
”willbeplacedbytheselecteditem.
7. Press
@ E
to send.
8. Transmission begins and a
busy message will appear
on the displays of the both
calculators.
• Andatainthesamememorylocationsinthereceiverwillbe
automatically overwritten.
• Upto10lescanbeselectedtosendatonce.
Example
If you wish to send the list L1, matrices mat A and mat B and
graph equation Y2 to the other calculator.
1. Preparethereceivingcalculatorbypressing
@
p
D
2
.
2. Press
@
p D
1
on the sending
calculator.
The send menu will appear.
3. Press
0 1
.
 Alistofallthedatastoredwillbearedisplayedandthecursor
positioned on the top line.
• Youcanalsoselect02 Listfor“L1”,03 Matrixfor“matA”and
“matB”,and04 Graph Eqnfor“Y2”,forexample,andsend
the data category by category.
4. MovethecursortoL1and
press
E
.
 A“
✱
”markwillashtothe
leftof“L1”,indicatingthatthe
item has been selected to be
sent.
 Press
E
again to deselect.
5. Selecttheotherlesyouwishtosendinthesamemanner.
6. Press
@ E
to start transmission.