Sharp el-9950

28
Chapter 2: Operating the Graphing Calculator
SETUP Menu
Usethismenutoverifybasiccongurations,suchastodenethecalculator’sediting
preferences, and scientific and mathematical base units.
To check the current configuration of the calculator, press
@
,
then
;
.
By entering menu items (B DRG
through H SIMPLE), various
setups can be changed. To exit
theSETUPmenu,press
C
.
Example
Display the calculation result of “1000
2
”inscienticnotation.
1. Press
@
, then
;
.
WithintheSETUPmenu,
press
C
, then
3
to
select 3 Sci under the C FSE
menu.
Tips: Using the arrow keys, move the cursor down to the C FSE position,
press
E
, and then move the cursor down to the 3 Sci position.
Press
E
toselectthesub-menuitem.
2. The display goes back to the
SETUPmenu’sinitialscreen.
3. Press
C
to exit the
SETUPmenu.
4. Press
# C
to clear
theCalculationscreen,type
1 0 0 0
y
, then
E
.
Checking the
calculator’s
configuration