Sharp el-9950

205
Chapter 11: Programming Features
6. Press
P
.
The program menu will open.
The commands and other
statements are preinstalled in
the calculator.
 DonotdirectlytypeincommandsusingtheAlphabeticalmode,
select each command from the program menu.
Note:  Press
@
j
, and you can access all the available
commands at once.
7. Select
A
1
.
8. Press
P
.
9. Select
A
2
.
The characters following a
double quotation mark can
bemanipulatedastext.Nodoublequotationmarkisrequiredto
close the text.
10 .Press
@
.
to enter
the alphabetic lock mode.
11 .TypeHELLOWORLD.
Up to 160 alphanumeric
characters can be input per
line.(Stringsofupto158charactersmaximumcanbeentered
per line excluding commands, because each command is
regarded as a single character.
When a line exceeds the width of the screen, the display will
shift to the left.
12 .Press
E
.
The cursor will move to the next line and the data input will be
stored.
 Storetheprogramlinebylinebypressing
E
,
{
or
}
.
13 .Press
@
q
to exit the program edit screen.
14 .Press
P
A
.Alistofstoredprogramswillappear.
 Selectaprogrambyusing
{ }
, and press
E
.
Starting
programming
Entering a
command
Entering the
alphabetical
input lock mode
Store the
program line by
line
Execute the
program