2-97
COPIERâ–ºOTHER FUNCTIONS
2-sided original copying
2-sided copy
Makes a 2-sided copy of the third and fourth original pages on an
insertion sheet.
Insertion
sheet
setting
conditions
Resulting copies
Insert an insertion sheet in 1-sided copy mode. Insert an insertion sheet in
2-sided copy mode.
Not copied
Inserts an insertion sheet between the second and third pages of
copies.
1-sided copy
Makes a 1-sided copy of the third original page on an insertion
sheet.
* The fourth original page is not
copied.
2-sided copy
Makes a 2-sided copy of the third and fourth original pages on an
insertion sheet.
• Before using the covers/inserts function, load insertion sheets in the tray.
• When selecting the covers/inserts function, place the originals in the document feeder tray, select 1-sided or 2-sided
copying, and select the number of copies and any other desired copy settings. When these settings have been completed,
perform the procedure to select covers/inserts.
• The insertion sheet size must be the same as the copy size.
• Up to 100 insertion sheets can be inserted.
• The document glass is not available for this function.
• Take care that two insertion sheets cannot be inserted into the same page.
• When performing 2-sided copying of 2-sided originals, an insertion sheet cannot be inserted between the front and reverse
sides of an original.
• This setting is not available when the covers/inserts function is disabled in "Settings (administrator)".
Insertion
sheet
setting
conditions
Resulting copies
Insert an insertion sheet in 1-sided copy mode. Insert an insertion sheet in
2-sided copy mode.
1
2
5
6
2
1
5
6
2
1
4
3
5
3
2
1
5
6
3
4
To Next Page
Loading...
Need help?
General
