4-49
FACSIMILE►BASIC TRANSMISSION METHODS
5
Tap the [Image Orientation] key with
the same orientation as the placed
original.
If this setting is not correct, a suitable image may not be
transmitted.
After the settings are completed, tap .
To configure the default setting of image orientation:
Select
[System Settings] → [Image Send Settings]
→
[Common Settings] → [Condition Settings]
→ [Image Orientation]
in "Settings (administrator)".
The ratio used for reduction or enlargement of the original will appear between the "Scan Size" and the "Send Size".
To Next Page
Loading...
