Sharp MX-B355W User Manual

1-42
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
3
Tap [Add New] on the action panel.
To return to the billing code selection window
Tap .
4
Tap the box of [Main Code], then type
in the main code.
Specify the code using up to 32 single-byte characters.
5
Tap the box of [Main Code Name], then type in the main code name.
Specify the code name using up to 32 double- or single-byte characters.
6
If necessary, select the share range of
billing code.
Public to All: Registers the billing code as a public code for
all users who use the machine.
Specify target public address: Limits the share range of
billing code to be registered only to the specified group. Up
to eight groups can be specified as a public destination.
For details on how to specify a public destination, refer to
"Shared range of billing code (page 1-41)
".
The public destination of a billing code is not displayed if user authentication is not performed. The mode is automatically
set to [Public to All].
CA
Main Code Main Code Name
Main Code Registration
Add New
CA
Main Code
Main Code Name
Main Code Registration
Cancel and Return
End Registration
Register
Next Billing Code.
(4)
(5)
CA
Main Code
Main Code Name
Available to
Public to All
Specify target
public address
Main Code Registration
Cancel and Return
End Registration
Register
Next Billing Code.

Sharp MX-B355W Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Scan Resolution	600 x 600 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Paper Capacity	550 sheets
ADF Capacity	50 sheets
Max Paper Size	A4
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Yes
Monthly Duty Cycle	50, 000 pages
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, macOS, Linux
Paper Size	A4, A5, A6, B5, Letter, Legal
Fax Transmission Speed	33.6 kbps
Print Resolution	Up to 1200 x 1200 dpi