5-36
SCANNER/INTERNET FAXâ–ºTRANSMITTING AN IMAGE
To change [Subject], [File Name], or [Body Text], tap the [Others] key and tap the [Send Settings] key.
â–º CHANGING THE SUBJECT, FILE NAME, AND BODY TEXT AT THE TIME OF INTERNET FAX TRANSMISSION
(page 5-37)
4
Tap the [Original] key.
• Set the density, resolution, and format in [System Settings]→[Image Send Settings]→[Internet Fax Settings]→[Default
Settings] in "Settings (administrator)".
• Tapping the [Others] key allows you to configure various functions, for example, collectively sending two original
pages as one sheet or original pages with different sizes.
5
Tap the appropriate orientation key.
After the settings are completed, tap .
6
Tap the [Start] key to start scanning of the original.
• If the original is placed on the document glass, the [Read-End] key appears in the touch panel.
If the original is only one page, go to step 8. To scan more pages, go to the next step.
• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and
transmission will take place.
You can tap the [Preview] key to check a preview of the image before sending an image. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED (page 5-66)
".
7
If the original was placed on the document glass, replace it with the next
original and tap the [Start] key.
Repeat until all originals have been scanned.
Preview
Start
CA
8½x11 8½x11
Receive
To Next Page
Loading...
Need help?
General
