7-11
SYSTEM SETTINGS►SETTING MODE LIST
Printer Settings
U: General user; A: System administrator/Administrator
Setup Items Factory default setting U A
● Printer Settings (page 7-86)
Condition Settings No Yes
Prohibit Notice Page Printing Enabled No Yes
Prohibit Test Page Printing Disabled No Yes
A4/Letter Size Auto Change Disabled No Yes
Bypass Tray Settings No Yes
• Enable Detected Paper Size in Bypass Tray Disabled No Yes
• Enable Selected Paper Type in Bypass Tray Enabled No Yes
• Exclude Bypass-Tray from Auto Paper Select Disabled No Yes
Job Spool Queuing Enabled No Yes
Disabling of USB Memory Direct Print Disabled No Yes
Disabling of Network Folder Direct Print Disabled No Yes
Disabling sending while printing Disabled No Yes
Interface Settings No Yes
Hexadecimal Dump Mode Disabled No Yes
I/O Timeout 60sec. No Yes
Enable Network Port Enabled No Yes
Network Port Emulation Switching Auto No Yes
Port Switching Method Switch at End of Job No Yes
Initial Status Settings Yes Yes
Copies 1 Yes Yes
Orientation Portrait Yes Yes
Paper Size Letter (8-1/2" x 11") Yes Yes
Output Tray Auto Yes Yes
Paper Type Plain Paper 1 Yes Yes
Resolution Setting 600dpi (High Quality) Yes Yes
Disable Blank Page Print Enabled Yes Yes
2-Sided Print 2-Sided Yes Yes
N-Up 1-Up Yes Yes
Fit To Page Enabled Yes Yes
Output Varies depending on the machine
configuration
Yes Yes
• Print per Unit Enabled Yes Yes
• Separator Page Yes Yes
- Insert Before Job Disabled Yes Yes
- Insert After Job Disabled Yes Yes
•Staple Sort* Disabled Yes Yes
Quick File Disabled Yes Yes
To Next Page
Loading...
Need help?
General
