Sharp MX-B355W

7-20
SYSTEM SETTINGS►SETTING MODE LIST
Inbound Routing (Forwarding/Storing) Settings
Setup Items Factory default setting U A
● Inbound Routing (Forwarding/Storing) Settings (page 7-108)
 Inbound Routing Settings – Yes Yes
 Table Registration
–
Yes Yes
 Sender Settings for Received Data Yes Yes
• Receive Line Select Yes Yes
- Internet Fax
Enabled
Yes Yes
-Fax
Enabled
Yes Yes
• Sender Address Setting Forward All Received Data Yes Yes
 Forwarding Destination Settings for Received Data Yes Yes
• Forward Condition 1 to 3 Yes Yes
- Forward Condition No Forwarding Yes Yes
- Day of the Week All Invalid Yes Yes
- Set Forwarding Time
Disabled
Yes Yes
- Start Time 00 Hour 00 Minute Yes Yes
- Completing Time 00 Hour 00 Minute Yes Yes
- Format for Forwarding TIFF(Multi) Yes Yes
 Sender Address Registration – Yes Yes
 Administration Settings No Yes
 Inbound Routing Settings No Yes
• Inbound Routing Disabled No Yes
• Disable Registration of Forward Table Disabled No Yes
• Disable Change/Delete of Forward Table Disabled No Yes
• Disabling of Forward Condition Change Disabled No Yes
• Print Style Setting Print at Error No Yes
 File Name Setting No Yes
• Preset of Character No Yes
- Character 1, 2
–
No Yes
- File Naming No Yes
+No.1 Sender Name No Yes
+No.2 Date & Time No Yes
+No.3 None No Yes
+No.4 None No Yes
+No.5 None No Yes
+No.6 None No Yes
+No.7 None No Yes
+ If received from a contact registered in the
address book, sender's name is changed to
contact's name.
Disabled
No Yes