7-125
SYSTEM SETTINGSâ–ºSYSTEM SETTINGS
Device Control
Various devices mounted on the machine can be set.
AB/Inch Type Setting
The numbers and units of the default settings and input ranges that appear in the setting screens can be switched
between inches and AB sizes.
Default Original Size Settings
Specify this setting when a particular original size is frequently used. The setting will appear in the [Original] key.
Specifying this setting allows the original size setting to be omitted.
Original Feeding Mode
The following original feeding modes can be set to operate by default in copy, image send, and scan to HDD. When a
mode is frequently used, this saves you from having to select the mode in another mode each time you need to use it.
• Mixed Size Doc. Same Width
• Slow Scan Mode
• Blank Page Skip
*
* Excluding fax mode and Internet fax mode.
Paper Type for Auto Paper Selection
The paper types* that the Auto Paper Selection function will select can be specified. Select one of the following settings:
• Plain 1
• Plain 2
•Recycled
The Auto Paper Selection function will not select any paper types other than the paper types specified with this setting.
* The paper type set for each paper tray by selecting [System Settings] in "Settings" → [Paper Tray Settings].
Plain Paper Compatibility Settings
Set the weight of the plain paper that is regularly used. Select from Plain Paper 1 or Plain Paper 2.
The weight of Plain Paper 1 is 16 to 24 lbs bond (60 to 89 g/m
2
). The weight of Plain Paper 2 is 24 to 28 lbs bond (90 to
105 g/m
2
). Check the weight of the plain paper that you regularly use, and set accordingly.
Detect Standard in Auto Color Mode
When the color mode is set to auto in scanner mode, the discrimination point for detecting whether originals are color or
black and white can be set to one of 5 levels. When set to [Closer to B/W], the originals are easier to recognize as black
and white. When set to [Closer color], the originals are easier to recognize as black and white.
Data Indicator Setting
Set the operation of the fax reception / data indicator light. For details, refer to "DATA NOTIFICATION INDICATOR AND
ERROR INDICATOR (page 1-7)".
Status Indicator will blink if data is received
Set whether or not the fax reception / data indicator light blinks when a fax has been received.
Error Light Setting
Set the operation of the error indicator light. For details, refer to "DATA NOTIFICATION INDICATOR AND ERROR
INDICATOR (page 1-7)".
To Next Page
Loading...
Need help?
General
