7-169
SYSTEM SETTINGSâ–ºSYSTEM SETTINGS
Copy Image Quality
Quick Image Quality Adjustment
You can easily perform copy quality adjustment in the default state.
You can change the default setting ([2]) to [1 (Smooth)] or [3 (Sharp)].
Gray Balance
You can adjust the gradation, and density of copies.
The density is divided into 3 ranges and you can adjust the level.
Density Adjustment when [Auto] is selected for Exposure
Configure settings for copying when [Auto] is selected for the copy exposure. The exposure can be adjusted separately
for copying using the document glass and copying using the auto document feeder.
Sharpness
You can make copy images in the default state sharper or softer.
Image Quality Priority
Specify image quality priority. Set this for the auto copy exposure and text / printed photo settings.
Print Image Quality
Quick Image Quality Adjustment
Perform quick adjustment of print quality.
You can change the default setting ([2]) to [1 (Smooth)] or [3 (Sharp)].
Gray Balance
You can adjust the tone and density of printing.
You can adjust the gradation, and density of printing.
The density is divided into 3 ranges and you can adjust the level.
Exposure Adjustment
Set the density of printing.
Line Thickness
When lines do not print correctly in special applications such as CAD, you can make lines thicker.
To Next Page
Loading...
Need help?
General
