MX-M700N DRIVE SECTION P – 8
4) Remove the 1/2 paper feed drive frame lower. Remove the
harness clamp.
5) Disconnect the connector, and remove the vertical paper
transport motor.
b. Paper feed tray 3/4 paper transport clutch 2
1) Remove the 1/2 paper feed drive unit.
(See “(1) 1/2 paper feed drive unit”)
2) Remove the 1/2 paper feed drive frame lower.
(See “a. Vertical paper transport motor”)
3) Disconnect the connector and remove the harness clamp, and
remove the paper feed tray 3/4 paper transport clutch 2.
4) Remove the E-ring, and remove the paper feed tray 3/4 paper
transport clutch 2.
c. Paper feed clutch (Paper feed tray 1)
1) Remove the 1/2 paper feed drive unit.
(See “(1) 1/2 paper feed drive unit”)
2) Remove the 1/2 paper feed drive frame lower.
(See “a. Vertical paper transport motor”)
3) Disconnect the connector and remove the harness clamp, and
remove the paper feed clutch (paper feed tray 1) unit.
4) Remove the E-ring, and remove the paper feed clutch (paper
feed tray 1).
To Next Page
Loading...
