MX-M700N PWB SECTION Q – 5
(2) DC main power PWB
(Method 1)
1) Remove the rear cabinet. (See “(1) AC power PWB”)
2) Disconnect the connector and remove the harness clamp.
Remove the AC power PWB unit.
3) Disconnect the connector and remove the DC main power
PWB.
(Method 2)
1) Remove the rear cabinet. (See “(1) AC power PWB”)
2) Remove the connecter.
3) Remove the AC/DC power unit.
4) Remove the AC power PWB unit.
5) Remove the DC power PWB unit.
To Next Page
Loading...
