Sharp MX-M700N - Power Section Disassembly;Assembly

MX-M700N PWB SECTION Q – 4
3) Remove the soft NIC PWB unit.
4) Remove the PWB protection plate. Remove the MFP controller
PWB.
B. Power section
(1) AC power PWB
1) Remove the rear cabinet.
2) Disconnect the connector, and remove the AC power PWB.
No. Parts
(1) AC power PWB
(2) DC main power PWB
(3) Power cooling fan motor 1
(4) Power cooling fan motor 2
(5) Dehumidifier heater relay PWB
(6) DC sub power PWB
(7) High voltage PWB (MC/DV/TC)
(1
)
(3
)
(4
)
(2
)
(6)
(7)
(5)