Sharp MX-M7570 - Page 828

8-32
SYSTEM SETTINGS►SETTING MODE LIST
• Batch Print Settings No Yes
6-28- Selection of [All Users] is not allowed. Enabled No Yes
- Selection of [User Unknown] is not allowed. Enabled No Yes
 Operation Settings
• Cancel Timer Disabled No Yes 1-15
• Disabling of Job Priority Operation Disabled No Yes
1-139
• Disabling of Bypass Printing Disabled No Yes
• Disable Auto Key Repeat Disabled No Yes 1-15
• Disabling of Clock Adjustment Disabled No Yes 8-76
• Disabling of Covers/Inserts Mode Disabled No Yes 2-112
• Disable Printing of Operation Manual from the
Operation Panel
Disabled
No Yes 1-104
 Device Control
• Disabling of Document Feeder Disabled No Yes
8-74
• Disabling of Duplex Disabled No Yes
• Disabling of Large Capacity Cassette*
1
Disabled No Yes
• Disabling of Optional Paper Drawer Disabled No Yes
• Disabling of Tray Settings Disabled No Yes
• Disabling of Finisher*
6
Disabled No Yes
• Disabling of Inserter*
2
Disabled No Yes
• Disabling of Offset Disabled No Yes
• Disabling of Stapler*
6
Disabled No Yes
• Disabling of Punch*
7
Disabled No Yes
• Disabling of Folding Unit*
8
Disabled No Yes
• Disabling of Trimming Module*
9
Disabled No Yes
• Disabling of Master Machine Mode Disabled No Yes
• Disabling of Client Machine Mode Disabled No Yes
 Security Settings
• Hidden Pattern Print Setting No Yes
8-98
- Disable Direct Entry Disabled No Yes
 Machine Identification Settings – No Yes 8-75
Setup Items Factory default setting U A Page