SHERCO 125 User Manual

25
ST SERIES
ENGINE DISASSEMBLING
• Slightly loosen the screw 5 alowing the
removal of the shifting mecanism.
• Loosen the shifting locator screw 6 , remove
it, as well as its spring.
• Remove the shifting drum snap gear 7 .
❱❘ Left side disassembling.
❱❘ Ignition removal.
• Undo the four screws of the ignition cover 1
and remove it , as well as its gasket.
• Place the tool 2 part number 10985 to hold
the flywheel and unlock the screw.
• Put the flywheel puller tool’s extension part
number10984.

SHERCO 125 Specifications

General

Starter	Kick starter
Bore x Stroke	54 mm x 54.5 mm
Cooling System	Liquid
Transmission	6-speed
Front Brake	Disc
Rear Brake	Disc
Displacement	124.8 cc