SICK Advanced Series

To Next Page

To Previous Page

Operating Instructions

CLV490 Bar Code Scanner

Figures and tables

no. 2020303 ...................................................................................................................5-13

Table 5-14: Pin assignment: 15-pin D Sub HD plug/wire colors of cable

no. 2020264 ...................................................................................................................5-13

Table 5-15: Wire colors of cable no. 2020981, cable 1 ("Host/Term" connection) ...5-14

Table 5-16: Wire colors of cable no. 2020981, cable 2 ("I/O" connection)...................5-14

Table 5-17: Wire colors of cable no. 2021267, cable 1 (connection for data

and function interfaces) ...............................................................................................5-15

Table 5-18: Wire colors of cable no. 2021267, cable 2 (connection for

power supply)...................................................................................................................5-15

Table 5-19: Maximum cable lengths between the CLV490 and host ...............................5-16

Table 5-20: Power consumption of the CLV490........................................................................5-16

Table 5-21: Power-up delay as a function of the device number GN ................................5-16

Table 5-22: Communication parameters for the host interface (default setting) ..........5-20

Table 5-23: Characteristic data of the "Sensor" switching input..........................................5-22

Table 5-24: Pin assignment for "IN 0" to IN 4" switching inputs..........................................5-24

Table 5-25: Characteristic data of the "IN 0" to "IN 4" switching inputs ..........................5-24

Table 5-26: Dynamic focus control: switching inputs/distance configuration

assignment table ............................................................................................................5-24

Table 5-27: Combination of the functions of the "IN 0" to "IN 4" switching inputs ......5-25

Table 5-28: Pin assignment for "Result 1" to "Result 4" switching outputs ....................5-26

Table 5-29: Characteristic data of the "Result 1" to "Result 4" switching outputs.......5-26

Table 6-1: Extract: Default parameter settings of the line scanner

CLV490-0010/-0011 .....................................................................................................6-2

Table 6-2: Extract: Default parameter settings of the line scanner with

oscillating mirror CLV490 ...............................................................................................6-2

Table 6-3: Reading distances for default settings......................................................................6-4

Table 6-4: Guide: Configuring the reading area........................................................................6-11

Table 6-5: Guide: Selecting the focus control mode..............................................................6-12

Table 6-6: Guide: Configuring the autofocus function (part 1)...........................................6-13

Table 6-7: Configuring the autofocus function (part 2) .........................................................6-15

Table 6-8: Guide: Configuring focus position switchover......................................................6-16

Table 6-9: Guide: Configuring oscillating mirror functions ....................................................6-17

Table 6-10: Overview: CLV490 applications in stand-alone configuration or in

arrangement with OTS400 .........................................................................................6-21

Table 6-11: Guide: Parameterizing the reading trigger for start/stopp mode

in stand-alone configuration .......................................................................................6-22

Table 6-12: Guide: Parameterzing internal object tracking.....................................................6-27

Table 6-13: Guide: Parameterizing the reading mode for tracking mode

in stand-alone configuration .......................................................................................6-29

Table 6-14: Guide: Parameterizing focus control in CLV490 for master/

slaves arrangement with OTC400 ...........................................................................6-30

Table 6-15: Guide: Parameterizing reading trigger in the CLV490 for master/

slave arrangement with OTC400 .............................................................................6-31

Table 6-16: Guide: Parameterizing slave mode in the CLV490 for arrangement

with OTC400 (master)..................................................................................................6-31

Table 6-17: Guide: Parameterizing operation mode in the OTC400 for master/

slaves arrangement.......................................................................................................6-32

Table 6-18: Guide: Parameterizing focus control in CLV490 for object tracking

mode with OTC400 .......................................................................................................6-33

Table 6-19: Guide: Parameterizing reading trigger in the CLV490 for object

tracking mode with OTC400 ......................................................................................6-34

Table 6-20: Guide: Parameterizing tracking in the CLV490 for object tracking

mode with OTC400 .......................................................................................................6-34

Table 6-21: Guide: Parameterizing slave mode in the CLV490 for object

tracking mode with OTC400 ......................................................................................6-35

Table 6-22: Guide: Parameterizing tracking mode in the OTC400......................................6-35

Table 6-23: Guide: Parameterizing the laser timeout ...............................................................6-36

WWW.100Y.COM.TW WWW.100Y.COM.TW WWW.100Y.COM.TW

Main Page

SICK Advanced Series - Page 11

Table of Contents

Related product manuals