SICK EtherNet/IP microScan3 - Data Output

7.17 Data output
Overview
Figure 73: Data output
1
Send mode
2
Data content
3
Angular range
You can define which data from the safety laser scanner is to be output via UDP or
T
CP/IP.
Important information
DANGER
D
anger of using data output for safety function
Data output may only be used for general monitoring and control tasks.
►
Do not use data output for safety-related applications.
CONFIGURATION 7
8020200/1NTM/2024-06-03 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™
129
Subject to change without notice