1 About this document
1.1 Function of this document
These operating instructions contain the information needed during the life cycle of the
s
afety laser scanner.
Operating instructions of the safety laser scanner must be made available to all people
who work with the device.
Read the operating instructions carefully and ensure that you have understood the
contents completely before you work with the safety laser scanner.
1.2 Scope
Product
T
his document applies to the following products:
•
Product code: microScan3 – EtherNet/IP™
•
“Operating instructions” type label entry: 8020198
Document identification
Doc
ument part number:
•
This document: 8020200
•
Available language versions of this document: 8020198
You can find the current version of all documents at www.sick.com.
1.3 Target groups of these operating instructions
Some sections of these operating instructions are intended for certain target groups.
Ho
wever, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected sections of these operating instructions
Target group Sections of these operating instructions
Project developers (planners, developers,
de
signers)
"Project planning", page 25
"Configuration", page 88
"Technical data", page 166
"Accessories", page 208
Installers "Mounting", page 80
Electricians "Electrical installation", page 85
Safety experts (such as CE authorized repre‐
sent
atives, compliance officers, people who
test and approve the application)
"Project planning", page 25
"Configuration", page 88
"Commissioning", page 139
"Technical data", page 166
"Checklist for initial commissioning and com‐
missioning", page 215
Operators "Operation", page 142
"T
roubleshooting", page 155
Maintenance personnel "Maintenance", page 148
"T
roubleshooting", page 155
1.4 Further information
www.sick.com
T
he following information is available via the Internet:
1 A
BOUT THIS DOCUMENT
8
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/1NTM/2024-06-03 | SICK
Subject to change without notice