13 Technical data
13.1 Variant overview
Ordering information:see "Or
dering information", page 205.
Table 34: Devices and type codes
•
P
erformance
package
•
Integration into
the controller
Protective field
r
ange
Device without sys‐
tem plug
System plug Position of the
system plug
when delivered
Device with system
plug
•
C
ore
•
EtherNet/IP
≤4.0m MICS3-ABAZ40IZ1 MICSX-BANNZZZZ1 Bottom MICS3-ABAZ40IZ1P01
≤5.5m MICS3-ABAZ55IZ1 Bottom MICS3-ABAZ55IZ1P01
≤9.0m MICS3-ABAZ90IZ1 Bottom MICS3-ABAZ90IZ1P01
•
Pr
o
•
EtherNet/IP
≤4.0m MICS3-CBAZ40IZ1 MICSX-BANNZZZZ1 Bottom MICS3-CBAZ40IZ1P01
Rear MICS3-CBAZ40IZ1P03
≤5.5m MICS3-CBAZ55IZ1 Bottom MICS3-CBAZ55IZ1P01
≤9.0m MICS3-CBAZ90IZ1 Bottom MICS3-CBAZ90IZ1P01
Rear MICS3-CBAZ90IZ1P03
•
Pr
o, PS
•
EtherNet/IP
≤4.0m MICS3-CBAC40IZ1 MICSX-BANNZZZZ1 Bottom MICS3-CBAC40IZ1P01
Rear MICS3-CBAC40IZ1P03
≤5.5m MICS3-CBAC55IZ1 Bottom MICS3-CBAC55IZ1P01
Rear MICS3-CBAC55IZ1P03
≤9.0m MICS3-CBAC90IZ1 Bottom MICS3-CBAC90IZ1P01
Rear MICS3-CBAC90IZ1P03
13.2 Version numbers and functional scope
Functional scope
Older de
vices might not support the full functional scope of the latest Safety Designer.
To identify the different levels of the functionality, we use a 3-digit version number. The
version number is marked with the letter V on the device.
The functional scope of the device can be read at the following locations:
•
Label on the device
•
Display, entry in Device info menu at Hardware
•
Safety Designer, Overview dialog (only with connected device)
•
Safety Designer, report
Table 35: Functional scope of the microScan3 Core – EtherNet/IP™ (devices with a max. protec‐
tive field range of 4.0m and devices with max. protective field range of 5.5m)
Version number Amendments and new functions EtherNet/IP: Minor Revi‐
sion
V 1.0.0
•
F
irst released version 1
V 1.1.0
•
Im
proved separation of the
checksum from the Safety
Designer version
1
13 TECHNICAL DATA
166
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/1NTM/2024-06-03 | SICK
Subject to change without notice