SICK EtherNet/IP microScan3 - Page 167

Version number Amendments and new functions EtherNet/IP: Minor Revi‐
sion
V 1.2.0
•
Op
tion to adjust the settings for
multiple sampling after switching
between monitoring cases
•
Option to configure behavior on
connection termination
•
Data output via UDP and TCP/IP
(measurement data, field inter‐
ruption, application data, process
information)
2
V 1.3.0
•
Time synchronization via SNTP 2
V 1.4.0
•
N
ew rights management using
user group Administrator (now 4
user groups)
•
Additional third option for reset‐
ting to factory settings
•
Modified process for resetting the
password
•
New StopAlarmdetection
function in Assembly 100 and
103
3
V 1.5.0
•
D
eviating multiple sampling after
object detection can be config‐
ured
•
Speed-dependent monitoring
case switching
•
Assembly 105
•
Interfaces and selected functions
can be activated or deactivated
•
According to the current specifi‐
cations for CIP Safety, only the
extended format is supported, but
no longer the base format
•
New Always ON (NON-safe) function
in monitoring case tables
4
Table 36: Functional scope of the microScan3 Core – EtherNet/IP™ (devices with a max. protec‐
t
ive field range of 9.0m)
Version number Amendments and new functions EtherNet/IP: Minor Revi‐
sion
V 1.0.0
•
F
irst released version, including
the following functions:
°
Improved separation of the
checksum from the Safety
Designer version
°
Option to adjust the settings
for multiple sampling after
switching between monitoring
cases
°
Option to configure behavior
on connection termination
°
Data output via UDP and
TCP/IP (measurement data,
field interruption, application
data, process information)
°
Time synchronization via SNTP
2
TECHNICAL DATA 13
8020200/1NTM/2024-06-03 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™
167
Subject to change without notice