7.16 Simulation
Overview
Figure 72: Simulation
1
Show or hide field types
2
Simulation tools
3
Select input conditions
4
Display the cut-off paths
You can visualize the result of the set configuration in the simulation.
Simulation components and options
•
Dis
play the status of the cut-off paths
•
Get feedback about which monitoring case is active for the selected input sample
(default:monitoring case 1 is active)
•
You can switch inputs, monitoring cases, etc. virtually using symbols and observe
the result
•
You can simulate an object detection in a field and check the result.
•
You can move fields to the foreground or to the background using the context
menu (right mouse button)
7 C
ONFIGURATION
128
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EtherNet/IP™ 8020200/1NTM/2024-06-03 | SICK
Subject to change without notice
To Next Page
Loading...
