EasyManua.ls Logo

SICK S3000 Cold Store

SICK S3000 Cold Store
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Display Possible cause Remedy
Device is addressed as
hos
t
Not an error. The symbol is displayed for approx.
2 seconds when a device that is addressed as a
host is switched on.

The device is receiving
no measured values
within a range of at least
90° (maximum measur‐
ing range of 49 m) and
is therefore not detect‐
ing any obstacles
present there, for exam‐
ple building walls.
b
F
or correct functioning of the safety laser
scanner, always ensure that measured values
are received within a range of 90°; this range
can be moved as required within the scan
range.

Device is dazzled
b
Check whether the device is being dazzled by
an external light source, e.g., headlight,
infrared light sources, stroboscopic light, sun
etc.
b
If necessary, re-mount the device.

Temperature error. The
oper
ating temperature
of the device is outside
the permitted range.
b
Chec
k whether the device is being operated as
per the permissible ambient conditions.

Invalid configuration of
t
he EDM
b
Chec
k that the machine-side EDM is con‐
nected correctly.

The addresses of both
t
he host device and the
guest device may have
been set to guest.
A device connected via
EFI or the connection to
the device is defective
or disrupted.
b
R
emove the jumper on the host device.
b
Check the connected device and the connec‐
tion to this device.

There is a short-circuit
be
tween the reset input
and another input or
output, or the reset
pulse does not fulfill the
requirements.
b
Chec
k the wiring for cross-circuits.
Or:
b
Check whether the reset pulse fulfills the
requirements (see figure 61).

Input signal for a non-
de
fined monitoring case
b
Chec
k the path of the vehicle.
Or:
b
Check the operating process of the monitored
machine or system.
b
If necessary, check the configuration of the
monitoring cases using the CDS.

Incorrect sequence
when s
witching the mon‐
itoring cases

Incorrect operation of
the control inputs
b
Chec
k the operation of the digital control
inputs.
TROUBLESHOOTING 10
8012029/ZA20/2019-11-14 | SICK O P E R A T I N G I N S T R U C T I O N S | S3000 Cold Store
103
Subject to change without notice

Table of Contents

Other manuals for SICK S3000 Cold Store

Related product manuals