SICK VMS4200

3 SYSTEM DESCRIPTION
38
8022965-17I6/2020-03-19|SICK
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
Subject to change without notice
If fixed scale values are defined for the VMS5200 (Multicontroller), the fix option is to be
marked on the system identification label. The associated dimension values with unit of
measurement (mm or inch) must be specified in indelible ink. The LMS4x21 2D LiDAR
sensor type labels must be affixed in the appropriate fields.
The type labels for the SIM2000 system controller and, if applicable, the SIM2000
dimensioning controller must be affixed to the corresponding fields of the metrology
information label.
Fig. 26: Information labels for the VMS5200 (Multicontroller) for fixed scale values with affixed
type labels
Legend
1 System information labels with fixed scale values
2 Metrology information label with affixed type labels
System information
labels with fixed
scale values