COMMISSIONING 6
8022965-17I6/2020-03-19|SICK
Subject to change without notice
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
Fig. 76: Procedure for assigning IP addresses - VMS4200/5200 (Multicontroller)
▸
Also disconnect the Ethernet cable of the SIM2000 dimensioning controller from the
Ethernet switch.
▸
Connect the configuration PC to a free port on the Ethernet switch
▸
Start SOPAS using the desktop icon or the Windows Start menu.
A new project is automatically created in SOPAS ET. One or more devices are combined
and edited in a single project.
Connection scheme for
the VMS4200/5200
(Multicontroller)
Launching SOPAS
To Next Page
Loading...