6 COMMISSIONING
8022965-17I6/2020-03-19|SICK
ORIGINAL OPERATING INSTRUCTIONS| VMS4200/5200 (Multicontroller)
Subject to change without notice
▸
Change the IP address of the configuration PC to the address range of the SIM2000
system controller.
▸
Perform a device search and change the default IP address as described.
The SIM2000 system controller and 2D LiDAR sensor, along with their device tiles,
are now included in the SOPAS project.
▸
In the case of the VMS4200/5200 (Multicontroller), the SIM2000 dimensioning
controller now needs to be connected to the Ethernet switch.
▸
Perform a device search and change the default IP address as described.
The SIM2000 dimensioning controller is now displayed as a device tile in the SOPAS
project.
Changing the
IP address of the
SIM2000
system controller
Changing the
IP address of the
SIM2000 dimensioning
controller
To Next Page
Loading...