Accessories
13.2 Accessories for 3UG4 monitoring relays
3UG4 / 3RR2 monitoring relays
328 Manual, 05/2016, NEB927043002000/RS-AC/004
The 3RP1903 push-in lugs are available for the monitoring relays.
With the help of the push-in lugs, the monitoring relays can be secured with screws on a
level surface (e.g. a wall). Two push-in lugs are required per device.
The figure below shows how to attach the 3RP1903 push-in lugs to the monitoring relay.
Table 13- 8 Attaching the push-in lugs on the monitoring relay
1 Insert the push-in lugs at the top and bottom on the
monitoring relay and tighten the push-in lugs with a
screwdriver.
To Next Page
Loading...
