Siemens 7MF4233 series

UMSITRAPDS3-1 Model Designations and Specifications
November 2005
9-5
Other versions
Add "-Z" to order number and add short spec.
7MF4233 - . . . . . - . . . . - Z
Transmitter with mounting bracket of:
- steel
A01
- stainless steel
A02
Han 7D plug (metal, gray)
4)
A30
Han 8U plug (instead of Han 7D)
4)
A31
Labeling of the rating plate (instead of German):
- English
B11
- French
B12
- Spanish
B13
- Italian
B14
Manufacturer test certificate M according to DIN 55 350, Part 18, and
according to ISO 8402:
C11
Acceptance test certificate B according to DIN 50 049 / EN 10 204-3.1 B
C12
Works certificate according to DIN 50 049-2.2 / EN 10 204-2.2
C14
Setting of upper output signal limit to 22.0 mA
D05
Acid gas version according to NACE
Only with Hastelloy process diaphragm
D07
IP 68 (not with Han 7D/Han 8U plug or cable screwed gland Pg 13.5)
D12
Application in zone 0 (basic device EEx ia)
4)
E02
Oxygen application (for oxygen measurement and
inert filling liquid: 2325 psi maximum
E10
Measuring range to be set, specify in clear text:
Y01: 0 to ... mbar, psi, kPa, Mpa, ... (27 characters maximum)
Y01
Tag number / description
(16 characters maximum) specify in clear text:
Y15
Tag message (27 characters maximum) specify in clear text:
Y16
Setting digital display, specify in clear text: mbar, psi, kPa, MPa, ...
Y20
Factory pre-settings other than "Y01", "Y20" and "D05" are not possible.
Notes:
1)
Version 7MF4333-1DY - Only up to a maximum span of 80 inH
2
O
3)
Not for "explosion proof" degree of protection
2)
Without cable screwed gland
4)
Not FM approved