Calibration 107
7. To reset the calibration, select the Reset check box.
NOTE: You cannot cancel the reset once you select Save. If you resize the reset
column and save your changes, those changes are retained when you exit out and
back into the window.
8. Select
Print, to print the data displayed.
9. To create a CSV file of the displayed data for archiving, or for exporting the data to
another application, do the following:
a. First, select the data you want to save.
b. Select
Create CSV.
c. Browse and select a folder in which to save the CSV file.
d. Select
Save.
e. Close the window.
To Next Page
Loading...
