Maintenance 159
7. Verify that the backup name is the current date.
NOTE: The system names the backup automatically, which consists of a yyyymmdd
format. Accept the destination folder default for the DVD disk drive letter (usually
D:) or select to
Browse choose a different destination. If a recordable disk is not
available, then the backup can be stored on the partitioned storage drive (D:).
8. Select Execute.
9. At the Backup window, select
OK to confirm the copy.
NOTE: If an error window displays, reformat the disk and try again.
10. When the file copy completes, at the Backup window, select OK.
Restoring system files
1. Insert the CD or the DVD containing the backup files into the CD drive.
NOTES
• When restoring backed-up data files (in the Data subfolder under the A002 folder),
select the
Delete Data Files checkbox at the ADVIA Backup window. This
deletes any current data files on the PC hard drive before the backed up system
and data files are restored.
• If the current data files are needed, perform a backup before restoring previous
files. The restore feature restores all files (system and/or data files) that were
previously backed up. If this is the case, close the ADVIA Backup window and
perform Backing up system files (see above).
2. At the Startup window, select
Back-up.
3. At the ADVIA Backup window, select
Restore a Backup Copy, then browse to the
source folder that contains the backup files to restore and select
Execute.
4. At the Restore confirmation window, select
OK.
If the disk contains all the backed up files required for the restore procedure, the copy
function begins.
5. If the backed up files are on more than one disk, select
Continue.
6. At the ADVIA Backup window, select
Exit, select Restore, then select OK.
7. At the ADVIA Backup window, select
Cancel.
8. Reboot the PC.
To Next Page
Loading...
