System Overview 41
Displaying version information and reading or writing a memo
Use this procedure to get information about the files currently in the system software.
1. At the System menu, select
Version info.
The Version Information window displays the system version number and other
information.
2. To close the window, select
Return.
Printing the screen
1. At the System menu, select
Screen Print.
The entire screen (as it displays on your monitor) prints.
2. Print the screen to the clipboard.
Logging on as a different user
Use this procedure to log on a different user. All results obtained for this operator
annotates to the corresponding user code from the User Code Settings window.
1. At the System(S) menu, select
Change User.
2. In the Please enter password box, enter the user password.
User passwords assigned in the User Code Settings window are not case sensitive.
3. Select
OK.
You are now logged in as the new user.
Exiting the system
Use this procedure to close the system software.
1. At the System(S) menu, select
Exit(x).
2. When prompted, select
Yes, then select Yes when prompted again.
In a few seconds, the Startup window opens. From there, you can restart the software or
shut down Windows.
Description of software windows
Menu items followed by 1 asterisk (*) are only available from the supervisor logon.
Menu items followed by 2 asterisks (**) are only available from the
tech_manager logon.
Request windows
Select the Request button to display the following Request menu items
Order Entry window
Each patient sample must have a workorder that contains a sample number and a request
for at least one test.
To Next Page
Loading...
