System Overview 39
Operation Panel
This window opens after you start the system software from the Startup window.
Use this window for the following tasks:
• perform routine tasks on the Chemistry system
• check the system status and alarm messages
Buttons
You select buttons on the Operation Panel to perform routine tasks.
Start
RGT
Pause
Wash
Initialize
Stop
SMP
Pause
Prime
Host On/Off
Error log
Audible
Operator's
Guide
Status and message boxes
The boxes on the right of the Operation Panel provide information on current system
conditions.
4 Time remaining indicator
5 Siemens Remote Services
Other tasks accessed from System(s) on the Operation Panel
Use the System(s) list to perform these tasks. To open the menu, select System(s) at the
top left of the panel.
To Next Page
Loading...
