Siemens CIM - The RESET Button; Slots for SIM Card and Cellular Module

Structure of the device
2.3 The "RESET" button
CIM
18 Operating Manual, 11/2022, A5E51250518-AC
LED
Status
Meaning
On
Firmware is crashed.
Red flashing CIM is powered by capacitor.
LAN (P1, P2, P3,
P4)
Flash
Port is receiving or sending data across Ethernet.
On
Port is already connected to Ethernet.
Off No connection to Ethernet.
mPCIe
Off
The cellular module is not detected.
Flash
The cellular module is initializing or registering.
On
The cellular module has initialized and registered successfully.
Flash
The cellular module is receiving/sending data.
2.3 The "RESET" button
The RESET button allows you to recovery the module to a factory default setting.
Operator input
Function
Keep pressing for longer than 10 seconds
Recovery the module to a default status
2.4 Slots for SIM card and cellular module
Both slots are behind the top housing.
Slot for the SIM card
Compatible cards
Mini SIM card, 25 x 15 mm (ISO/IEC 7810 ID-000)