Web-based configuration
5.4 Web pages
CIM
Operating Manual, 11/2022, A5E51250518-AC
49
5.4.3 LAN settings
This page allows you to set the IP for CIM.
If you forget the password for login, you need to reset the CIM to factory setting (Page 18)
and log in with the default password.
5.4.4 SGLAN Setting
5.4.4.1 Setting up SGLAN server
This page allows you to set the CIM work as SGLAN server.
server, CIM must meet the following requirements:
CIM can access the Internet through IPv4/IPv6
The IPv4/IPv6 address assigned to SIM card by telecom operator can be accessed over the
Internet through IPv4/IPv6
The SIM card in CIM supports sending and rece
iving short message if you set up SGLAN by
SMS
The IP of the devices in SGLAN are in the same subnet and not conflict with each other
1. Enable "CIM as SGLAN Server".
2. Select the mode.
To Next Page
Loading...
