Siemens CIM - Setting up SGLAN Client

Web-based configuration
5.4 Web pages
CIM
50 Operating Manual, 11/2022, A5E51250518-AC
3. Set the "Access password" and confirm it in "Confirm access password".
Note
The default password for SGLAN server is “sglan”.
4. Click "Save changes".
5.4.4.2 Setting up SGLAN client
This page allows you to set the CIM work as SGLAN client.
Note
To works as an SGLAN client, CIM must meet the following requirements:
•
CIM can access the Internet through IPv4/IPv6
•
The IPv4/IPv6 address assigned to SIM card by telecom operator can be accessed over the
Internet through IPv4/IPv6
•
The SIM card in CIM supports sending and receiving short message if you set up SGLAN by
SMS
•
The IP of the devices in SGLAN are in the same subnet and not conflict with each other
Requirement
• You get the following information of the SGLAN server: Mode, Server IP address/Phone
number, access password.