Web-based configuration
5.4 Web pages
CIM
Operating Manual, 11/2022, A5E51250518-AC
77
Advance setting
After enabling the advance setting, you can set the APN and Dial number for CIM:
APN: Access Point Name
Dial number: access code to the dial-up network.
SMS Center Number
You can set the SMS center number in this field.
5.4.8.3 Extra initialization commands
You can use this page to set your customized initialization commands for the cellular
modular.
You can input multiple commands, each command starting with "AT" and ending with Enter.
Consult the cellular module provider for detailed AT command.
5.4.8.4 GNSS settings
Current position
You can check the following information for CIM in this field:
• Latitude
• Longitude
• Speed
• Altitude
• Number and type of used satellites
• Total number of used satellites
Position settings
You can enable or disable "Map to UDM" in this field.
By clicking "Position Address Space Info", you can view the position address space information
in UDM.
5.4.9 Security
5.4.9.1 Protocol
This page allows you check and manage all the protocols. You can enable/disable a protocol
by toggling the switch. Except HTTPS, all other protocols are disabled by default.
To Next Page
Loading...
