Siemens CIM - Preface

CIM
Operating Manual, 11/2022, A5E51250518-AC
3
Preface
Purpose of the documentation
This manual describes communication interface module (CIM).
This manual supports you during the configuration, installation and operation of the
communication modules.
Product names and abbreviations
• CIM or device
In this document, the term "CIM" or "device" is also used instead of the full product name
"CIM“. CIM is the abbreviation for Communication Interface Module.
Use of the device
Please observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on
the handling of the product or on the section of the documentation to which particular
attention should be paid.
Note
To prevent injury, read the manual before use.
The manual is delivered online, you can download the document from Central technical
support (https://support.industry.siemens.com/cs/ww/en/).
History
Edition
Comment
09/2021
First Edition
07/2022
Added Description for UKCA certification.
11/2022
• Supported setting up SGLAN for devices from different site with CIM.
• Added monitor variables in CIM web-based configuration.