Siemens CIM - Page 57

Web-based configuration
5.4 Web pages
CIM
Operating Manual, 11/2022, A5E51250518-AC
57
3. Toggle on "With parameter" as you need.
Note
If you toggled on "with parameter", the variable value of the bind event will be added in
the message CIM sends. If the parameter is in hexadecimal, 0x is also added befo
re the
value.
•
Message content with parameter: message text + value of the parameter.
•
Message content with parameter in hexadecimal: message text + 0x+value of the
parameter.
For the allowed parameters, refer
RESTful API (Page 72).
4. Repeat the steps 1-3 to add all messages you need.
Note
If the message is referred by an event or an action, the message cannot be changed or
deleted.
Change a message
Click for you message you want to change, then enter the new name and message text.
Delete a message
Click for the message you want to delete.