Web-based configuration
5.4 Web pages
CIM
Operating Manual, 11/2022, A5E51250518-AC
87
Prerequisites
Download the upgrade package from After sales information system
(https://support.industry.siemens.com/cs/start?lc=en-US).
Upgrade the firmware
Upgrade firmware will not change any configuration. However, Siemens recommends you
backup configuration data through the path System Setting --> System Configuration
Management before the upgrading.
In the upgrade environment, other functions of the system are stopped, such as network
communication, data bindings and so on.
Follow these steps to perform an upgrade:
1. Click "Upgrade system" in the system upgrade page.
2. Navigate to the folder which you saved the upgrade package and select it.
The upgrade package can be stored on the PC or a storage media, but not on a cell phone.
Make sure the upgrade package is not stored on a cell phone.
3. Wait until the upgrade completed.
Do not power off the device, disconnect the device or refresh the page during the
upgrade. Otherwise, the upgrade may fail.
CIM restarts to utilize the new features after the upgrade completed.
If you cannot access the web server after the firmw
are upgrade, close and re-open the
browser or clear the cash files of the browser.
To Next Page
Loading...
